Discount Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case
Are you looking for Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case, just click and see reasonable price.
The Starrett 123EM-12 master vernier caliper measures 0 to 12 inches with 0.001” accuracy and 0-300mm with 0.02mm accuracy. The vernier scales are longer than normal, with 50 divisions, allowing half as many bar graduations as conventional single-vernier tools. These widely-spaced graduations make it easier to read a measurement from the caliper. This easy-reading measuring tool allows for reliable and accurate readings with the sharp, black graduations on the no-glare, satin chrome-finished bar.
The open-face design of the slide allows both the inside and outside vernier scales to be indicated on the same side, allowing both inside and outside measurements to be read without turning the tool over. The screw-type adjusting nut allows for fine measurement adjustments for accuracy, while the lock nut holds measurements for reading, repeating, or transferring the measurement. The tool steel construction makes the jaws harder and more wear-resistant than an equivalent stainless steel jaw. The bars are hardened and stabilized. The measuring surfaces are hardened, ground, and lapped, for a very hard, flat, and polished measuring surface that is considerably more accurate than a surface that has not had these operations performed. The graduations on the bar are machine-divided for accuracy. The master bar’s combination of straight and angular ways allow positive alignment of graduations, and easy adjustment of the flush-fitting verniers. Aligning flush vernier plate graduations to the same plane as the graduations on the bar ensures readability and accuracy. This caliper has divider points on the back side to help accurately set dividers and machine parts. - Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case
Tight, smoothly fitted slides for the maximum possible accuracy and easy adjustment.Long 50-division vernier scale permits half as many bar graduations as conventional single-vernier tools, for easier measurement reading.Lock nut holds measurements for repeatability.Screw-type adjusting nut allows for fine measurement adjustments, for greatest accuracy.Precise graduations of 0.01" and 0.02mm.The open-face design of the slide allows both the inside and outside vernier scales to be indicated on the same side, allowing both inside and outside measurements to be read without turning the tool over. The screw-type adjusting nut allows for fine measurement adjustments for accuracy, while the lock nut holds measurements for reading, repeating, or transferring the measurement. The tool steel construction makes the jaws harder and more wear-resistant than an equivalent stainless steel jaw. The bars are hardened and stabilized. The measuring surfaces are hardened, ground, and lapped, for a very hard, flat, and polished measuring surface that is considerably more accurate than a surface that has not had these operations performed. The graduations on the bar are machine-divided for accuracy. The master bar’s combination of straight and angular ways allow positive alignment of graduations, and easy adjustment of the flush-fitting verniers.
Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case Feature
Today, "Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case" is available with unbeatable offers, Check out Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case at best price
Reference website: Starrett 123EM-12 Master Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005"/0.01mm Accuracy, 0.001"/0.02mm Graduation, Without Case
All information above is posed on 2012-05-14, some data and price may be changed